manufacturing of pcb boards with high quality design
There are two main methods when mounting components on a PCB. These are Through-Hole Mounting (THM) and Surface Mounting (SMT).
Last March, the artificial intelligence (AI) program AlphaGo beat Korean Go champion LEE Se-Dol at the Asian board game.
Our engineering group performed calculations of the stress induced on axial components during the forming and insertion process.
The global biosensors market is dominated by F. Hoffman-La Roche Ltd., Abbott Point of Care Inc., and LifeScan Inc., which collectively held 54% of the global market in 2013
Sunthone proudly marks the celebration of 10 years in business. As a competent player in PCB industrial, Sunthone offers high quality PCB products to all customers, and its business expands to PCBA whole set solutions. During the last decade, Sunthoen is always building high quality printed circuit boards, providing satisfactory assembly services, creating strong relationships among our valued customers, suppliers and employees.
More than 50 challenging civilian occupations await young people at the Bundeswehr, and electronics plays an important role in some of them.
Low Parts Count: Once the Low Parts sensor is made (parts are not detected) the machine counts insertions for the head that is low on parts. When the count is reached the machine stops with an error code indicating it is low on parts. If the sensor detects parts before the machine stops, the counter is reset. If no Low Parts sensor is mounted, this field is not used and the default is zero.
A printed circuit board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductivesubstrate. Advanced PCB's may contain components - capacitors, resistors or active devices - embedded in the substrate.
Printed circuit board artwork generation was initially a fully manual process done on clear mylar sheets at a scale of usually 2 or 4 times the desired size. The schematic diagram was first converted into a layout of components pin pads, then traces were routed to provide the required interconnections.
Manufacturers never use the Gerber or Excellon files directly on their equipment, but always read them into their CAM system. PCB's cannot be manufactured professionally without CAM system. The PCB CAM system performs the following functions:
In subtractive methods the unwanted copper is removed to leave only the desired copper pattern. In additive methods the pattern is electroplated onto a bare substrate using a complex process. The advantage of the additive method is that less material is needed and less waste is produced.